Article Posted on : - Nov 07, 2012

A file photo.

LONDON (PTI): Researchers have developed a new aircraft-grade alloy that is twice as light as conventional nickel superalloys, paving way for creating fuel-efficient lighter planes.

Airlines are always looking for ways to save fuel by cutting down on weight without sacrificing safety. Generally, cutting weight by 1 per cent will save up to 1.5 per cent in fuel, European Space Agency (ESA) said in a statement.

For commercial airlines, this saving quickly adds up, offering cheaper flights and fewer stopovers while reducing the overall impact on the environment.

For years, engineers have known that titanium aluminide alloys offer great weight benefits over the nickel superalloys used today in conventional jet engines.

Since the newer alloy can withstand extreme temperatures up to 800 degree Celsius, it is of particular interest to engine manufacturers.

Although it is possible to make the alloy in a laboratory, casting it in the shapes required by industry, such as a turbine blade, is not simple.

ESA scientists working in the Impress project looked into the problem. To understand natural processes, scientists often remove as many external variables as possible, concentrating their observations on core interactions.

The Impress project needed to 'switch-off' a factor that hampers observations: gravity.

Aluminium samples were heated in a small furnace carried in a sounding rocket launched from Kiruna, Sweden. During six minutes of free fall, they were heated to over 700 degree Celsius and then monitored by X-rays as they cooled.

Looking at the results, the researchers realised that casting titanium aluminides might require looking in the opposite direction: hypergravity.

ESA is the only organisation that offers all levels of gravity, so the Impress team turned to the agency's centrifuge in the ESTEC research and technology centre, the Netherlands to test their theory.

Casting the metals in a centrifuge creating up to 20 times normal gravity helps the liquid metals to fill every part of a mould, producing a perfectly cast alloy, even with complex shapes.

Analysing metal casting in as many ways as possible produced building blocks of knowledge that allowed the industrial process to be refined and commercialised.

Over a million jet turbine blades will be made over the next eight years, and using titanium aluminide would reduce their weight by 45 per cent over traditional components.